Description
The laser protection window is mainly used to block debris from splashing during laser cutting and prevent splashes from damaging the lens. Anti-reflection coatings with high damage threshold (>15J/cm2) are plated on both sides to reduce reflections. It is currently widely used in light cutting, laser marking and other applications.
Product Features
• High anti-damage threshold
• Very low residual reflection
• Low scattering
• Little absorption
Typical Technical Parameters:
Material: Fused Silica/K9
Dimensional tolerance: +0/-0.2mm
Thickness tolerance: 0.2mm
Clear aperture: >80%
Parallelism: <1 point
Surface quality: 60/40
Transmitting wavefront distortion: <λ every 25mm @633nm
Chamfer: <0.5mm*45 degree
Coating: Anti-reflection coating with high damage threshold on both sides